Display The Cpu, User Wifi Network, And Lan Traffic Loads - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
Table 8. Connected WiFi device information (Continued)
Setting
RSSI
Block
5. To block a connected WiFi device, do the following:
a. Click the associated Block button in the Block column on the right.
A pop-up window opens.
b. Click the OK button.
The WiFi device no longer displays on the page. An ACL that denies the MAC
address of the WiFi device is automatically added to the user WiFi network from
which you blocked the WiFi device. This ACL denies the WiFi device access to
the user WiFi network but allows access to all other WiFi devices. (For more
information, see Manage access to a user WiFi network based on a client's MAC
address on page 56.)
6. To refresh the information on the page, click the Refresh button.
Display the CPU, user WiFi network, and LAN
traffic loads
You can display the CPU, user WiFi network, and LAN traffic loads on the AP.
To display the CPU, user WiFi network, and LAN traffic loads:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
Monitor the AP and its Network
Connections
Description
The received signal strength indicator (RSSI) for the WiFi device. The RSSI is expressed
in decibel-milliwatts (dBm).
Whether the WiFi device is blocked from the user WiFi network. For more information,
see the next step.
100 User Manual