Network Settings Required To Use Network Twain Scanner; Ethernet - Ricoh Aficio MP 4000B General Settings Manual

1. Connecting the Machine
Network Settings Required to Use Network
TWAIN Scanner
1
This section lists the network settings required for using the TWAIN Scanner under the network environment.
• These settings should be made by the system administrator, or with the advice of the system
administrator.

Ethernet

This section lists the settings required for using the network TWAIN Scanner with an Ethernet connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
40
User Tool
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Ethernet Speed
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
As required