Settings Required To Use Network Twain Scanner - Ricoh C3030 Operating Instructions Manual

Connecting the Machine

Settings Required to Use Network TWAIN Scanner

This section lists the settings required for using TWAIN Scanner under the net-
work environment.
1
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Ethernet Speed
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.58 "Interface Settings"
30
User Tool Setting Requirements
Neccessary
As required
As required
As required
As required
As required
Neccessary
Neccessary
As required
As required
As required
As required