Connecting To The Wireless Lan Interface - Ricoh Aficio MP 4000B General Settings Manual

Connecting to the Wireless LAN Interface

This section describes how to connect to the wireless LAN interface.
• Check the settings of the IPv4 address and subnet mask or IPv6 address of this machine.
• For details about how to set the IPv4 address and subnet mask from the control panel of the machine,
see "Interface Settings".
• Before using this machine with a wireless LAN interface, you must select [Wireless LAN] in [LAN Type].
• p.69 "Interface Settings"
Setup Procedure
This section describes how to setup wireless LAN interface.
Set up wireless LAN according to the following procedure:
• Select [802.11 Ad-hoc Mode] when connecting Windows XP as a wireless LAN client using Windows
XP standard driver or utilities, or when not using the infrastructure mode.
Connecting to the Interfaces
BBM002S
1
21