Connecting the Machine
Settings Required to Use Network TWAIN Scanner
This section describes necessary set items for using TWAIN Scanner under the
network environment.
1
Ethernet
This section describes necessary set items for using network TWAIN Scanner
with Ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
Reference
p.53 "Interface Settings"
p.63 "File Transfer"
28
Downloaded From ManualsPrinter.com Manuals
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Ethernet Speed
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Setting Requirements
Mandatory
As required
As required
As required
As required
As required
Mandatory
Mandatory
As required
As required
As required
As required