Wireless Lan - Ricoh Aficio MP 4000B General Settings Manual

Menu
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• When POP before SMTP is set to [On], also make settings for Reception Protocol and POP3 / IMAP4
Settings.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.69 "Interface Settings"
• p.77 "File Transfer"

Wireless LAN

This section lists the settings required for sending e-mail with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
User Tool
Reception Protocol
POP3 / IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program / Change /
Delete E-mail Message
Scanner Resend Interval Time
Number of Scanner Resends
User Tool
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Network Settings Required to Use E-mail Function
Setting Requirements
As required
As required
As required
As required
As required
As required
As required
Setting Requirements
Necessary
Necessary
As required
As required
1
31