Wireless Lan - Ricoh Aficio MP 4000B General Settings Manual

• p.69 "Interface Settings"

Wireless LAN

This section lists the settings required for using the network TWAIN Scanner a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/ Wireless LAN SSID Setting
Interface Settings/ Wireless LAN Ad-hoc Channel
Interface Settings/ Wireless LAN Security Method
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
Network Settings Required to Use Network TWAIN Scanner
User Tool
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Communication Mode
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
Necessary
As required
As required
As required
1
41