Ricoh Aficio MP 4000B General Settings Manual page 278

7. Registering Addresses and Users for Facsimile/Scanner Functions
Changing the protocol
This section describes how to change the protocol.
1. Press [SMB] or [FTP].
2. A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
• p.260 "Using SMB to Connect"
7
• p.266 "Using FTP to Connect"
Deleting an NCP Folder
This section describes how to delete the registered NCP folder.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
276