Using Web Auth Bundles In Amp - Dell PowerConnect W-Airwave User Manual

5. You can also import a CSV list of groups and their external TFTP firmware servers.
settings of this page.
Table 32 Supported Firmware Versions and Features Fields and Default Values
Setting
Type
Firmware Version
Description
Upload firmware
files (and use built-in
firmware)
Use an external
firmware file server
Use Group File
Server
Firmware File Server
IP Address
Firmware Filename
NOTE: Additional fields may appear for multiple device types. AMP prompts you for additional firmware information as required.
For example, Intel and Symbol distribute their firmware in two separate files: an image file and an HTML file. Both files must be
uploaded to AMP for the firmware to be distributed successfully via AMP.
6. Select Add to import the firmware file.
To delete a firmware file that has already been uploaded to AMP, return to the Device Setup > Upload Firmware
& Files page, select the checkbox for the firmware file and select Delete.
NOTE: A firmware file may not be deleted if it is the desired version for a group. Use the Group > Firmware page to investigate this
potential setting and status.

Using Web Auth Bundles in AMP

Web authentication bundles are configuration files that support Cisco WLC wireless LAN controllers. This
procedure requires that you have local or network access to a Web Auth configuration file for Cisco WLC
devices.
56 | Configuring AMP
Default Description
Aruba Indicates the firmware file is used with the specified type. If you select an IOS device from
Controller the Type drop-down menu, you have the option of choosing a server protocol of TFTP or
FTP. If you choose FTP, you may later notice that the firmware files are pushed to the
device more quickly.
With selection of some types, particularly Cisco controllers, you can specify the boot
software version.
None Provides a user-configurable field to specify the firmware version number. Appears if you
did not select the default Dell PowerConnect Controller type.
None Provides a user-configurable text description of the firmware file.
Built-in Selects the TFTP server that access points use to download their firmware. The built-in
TFTP server is recommended.
If you choose to use an external TFTP server, enter the File Server IP Address and the
Firmware Filename.
N/A You can also choose to assign the external TFTP server on a per-group basis. If you select
this option, you must enter the IP address on the Groups > Firmware page. Complete the
Firmware File Server IP Address field.
NOTE: With selection of some Types, you are prompted with the Server Protocol field that
lets you select which protocol to use, and this varies from device to device. If you select
FTP, AMP uses an anonymous user for file upload.
Disabled If you opt to use an external firmware file server, this additional option appears. This
setting instructs AMP to use the server that is associated with the group instead of
defining a server.
None Provides the IP address of the External TFTP Server (like SolarWinds) used for the
firmware upgrade. This option displays when the user selects the Use an external
firmware file option.
None Enter the name of the firmware file that needs to be uploaded. Ensure that the firmware
file is in the TFTP root directory. If you are using a non-external server, you select Choose
File to find your local copy of the file.
Table 32 itemizes the
Dell PowerConnect W-AirWave | Version 7.3