Dell PowerConnect W-Airwave User Manual page 119

Table 71 APs/Devices > Monitor > Device Info Fields and Default Values (Continued)
Field
Quick Links
Total Users
*This field is only available for mesh APs. To see an example of mesh monitoring, see
page 126.
describes the information in the Radio table for APs:
Table 72 APs/Devices > Monitor > Radio Fields and Descriptions
Field
Name
MAC Address
Tx Power
Antenna Type
Channel
Users
Bridge Links
Mesh Links *
BW
Active SSIDs
Notes
Devices with wired interfaces will display the Wired Interfaces table, which is described in
Table 73 APs/Devices > Monitor > Wired Interfaces Fields and Descriptions
Field
Name
MAC Address
Users
Type
Admin Status
Dell PowerConnect W-AirWave | User Guide
Description
Open controller web UI: A drop-down menu that allows you to jump to the controller's UI in a new

window.
Run a command: A drop-down menu with a list of CLI commands you can run directly from the APs/

Devices > Monitor page.
Displays the total number of users associated to the AP regardless of which radio they are associated to,
at the time of the last polling.
Description
Shows the Radio type of the first radio (802.11a, 802.11b or 802.11g) as a link to the Radio Statistics page for
that radio. If the device has more than one of the same radio, it will show a number in parentheses like (1)
or (2).
Displays the MAC address of the corresponding radio in the AP.
Some devices report transmit power reduction rather than transmit power; no value is reported for those
devices.
Indicates Internal or External radio. For devices where antenna type is defined per AP, including Dell
PowerConnect W devices, the same antenna type will be listed for each radio.
Displays the channel of the corresponding radio.
Displays the number of users associated to the corresponding radio at the time of the last polling.
Displays the number of bridge links for devices that are point-to-multi-point (see the Groups > PTMP page
for more details).
Displays the total number of mesh links to the device including uplinks and downlinks.
Displays the amount of bandwidth being pushed through the corresponding radio interface or device at the
time of the last polling.
Displays the SSID(s) of the radio(s).
A free-form text field for entering fixed asset numbers or other device information. This information is
printed on the nightly inventory report. Notes can be entered on the APs/Devices > Manage page.
Description
Displays the name of the interface.
Displays the MAC address of the corresponding interface in the device.
Displays the number of users associated to the corresponding interface at the time of the last polling.
Indicates the type of interface - gigabitEthernet or fastEther for wired interfaces.
Up or down
"Monitoring Data for Mesh Devices" on
Table
Discovering, Adding, and Managing Devices | 119
73: