Using The System > Status Page - Dell PowerConnect W-Airwave User Manual

Using the System > Status Page
The System > Status page displays the status of all AirWave services. Services will either be OK, Disabled, or
Down. If any service is Down (displayed in red) please contact Dell support at support.dell.com. The Reboot
System button provides a graceful way to power cycle your AMP remotely when it is needed. The Restart AMP
button will restart the AMP services without power cycling the server or reloading the OS.
this page.
Figure 126 System > Status Page Illustration
The link diagnostics.tar.gz contains reports and logs that are helpful to Dell support at

troubleshooting and solving problems. Your Dell support representative may ask for this file along with other
logs that are linked on this page.
Similarly, the VisualRFdiag.zip link contains VisualRF diagnostic information that might be requested by

AirWave support.
A summary table lists logs that appear on the System > Status page. These are used to diagnose AMP

problems. Additional logs are available via SSH access in the /var/log and /tmp directories; support engineers
180 | Performing Daily Administration in AirWave
Figure 126
support.dell.com
Dell PowerConnect W-AirWave | Version 7.3
illustrates
in