Dell PowerConnect W-Airwave User Manual page 149

Table 87 Groups > Templates Fields and Default Values (Continued)
Setting
Fetch Date
Version
Restriction
3. To create a new template and add it to the AMP template inventory, go to the Groups > List page, and select
the group name, and the Details page appears. Select Templates, then Add.
4. Complete the configurations illustrated in
Figure 111 Groups > Templates > Add Template Page Illustration
Dell PowerConnect W-AirWave | User Guide
Description
Sets the date that the template was originally fetched from a device.
Designates that the template only applies to APs running the version of firmware specified. If the restriction is
None, then the template applies to all the devices of the specified type in the group. If there are two templates
that might apply to a device the template with the most restrictions takes precedence. If there is a template that
matches a devices firmware it will be used instead of a template that does not have a version restriction.
Figure 111, and the settings described in Table 88.
Creating and Using Templates | 149