You can use this report as the central starting point to improve uptime by multiple criteria. This report covers
protocol-oriented, device-oriented, or SSID-oriented information. This report can help to monitor and optimize
the network in multiple ways. This report can demonstrate service parameters, can establish locations that have
superior or problematic uptime availability, and can help with additional analysis in multiple ways. Locations,
device groups, or other groupings within a network can be identified as needing attention or can be proven to
have superior performance when using this report.
Figure 171
Figure 171 Device Uptime Report Illustration
Table 131 Reports > Generated > Device Uptime Report Unique Fields and Descriptions
Field
SNMP Uptime
ICMP Uptime
Time Since Last Boot
Using the IDS Events Report
The IDS Events Report lists and tracks IDS events on the network involving APs or controller devices. This
report cites the number of IDS events for devices that have experienced the most instances in the prior 24 hours,
and provides links to support additional analysis or configuration in response.
NOTE: Your role must be enabled to view RAPIDS to see this report.
The Home > Overview page also cites IDS events, and triggers can be configured for IDS events. Refer to
"Setting Triggers for IDS Events" on page 189
Selecting the AP device or controller name takes you to the APs/Devices > List page.
236 | Creating, Running, and Emailing Reports
and
Table 130
illustrate and describe the Reports > Generated > Device Uptime Detail report.
Description
Displays the percentage of time the device was reachable via ICMP. AMP polls the device via SNMP at
the rate specified on the Groups > Basic page.
Displays the percentage of time the device was reachable via ICMP. If the device is reachable via
SNMP it is assumed to be reachable via ICMP. AMP only pings the device if SNMP fails and then it
pings at the SNMP polling interval rate.
The uptime as reported by the device at the end of the time period covered by the report.
for additional information.
Dell PowerConnect W-AirWave | Version 7.3