Last Steps In Editing An Uploaded Image; Provisioning Existing Access Points Onto The Floor Plan - Dell PowerConnect W-Airwave User Manual

Figure 231 Checking for CAD errors

Last Steps in Editing an Uploaded Image

Click the Save and Close button to begin provisioning APs or Save and New to upload another floor plan. After
clicking Save and Close, you is redirected back into QuickView where you can provision APs, IDFs, and wired
infrastructure.

Provisioning Existing Access Points onto the Floor Plan

To provision existing AP in your network onto the floor plan you just uploaded, follow these steps:
1. Navigate to VisualRF > Floor Plans.
2. Select the floor plan you have uploaded using the floor number or name links in the list.
3. Select the Add Deployed Device icon in the Edit menu. A popup window list of devices in your AMP appears
on the screen, as shown on 4..
4. Select whether to navigate by Group or by Folder in the View By field.
NOTE: Alternatively, you can use the Search field.
5. Expand the Group or Folder containing the access points which need to be provisioned on this floor plan.
Note that by default, devices that have already been added to VisualRF are hidden. To show them, clear the
"Hide Devices already added to VisualRF" checkbox at the bottom of the list.
6. Click and drag an AP to its proper location on the floor, as shown in
Figure 232 Provisioning APs onto the Floor Plan
7. Once all APs are provisioned on the floor plan, select Save (floppy disk icon) in the top right of the QuickView
window.
286 | Using VisualRF
Figure 232:
Dell PowerConnect W-AirWave | Version 7.3