Using Custom Reports - Dell PowerConnect W-Airwave User Manual

Table 127 Reports > Generated Page Fields and Descriptions
Field
Report Start
Report End
Role

Using Custom Reports

Custom reports allow users to specify the data that should be included in a report.
Perform these steps to create a Custom Report.
1. Navigate to the Reports > Definitions page.
2. Select Add.
3. By default, the Custom option will be selected in the Type drop-down menu, and the Custom Options
section appears below as shown in
Figure 166 AMP Custom Options Page Illustration
The left pane of the Custom Options section lists all available data that can be included in the report. For
example, if the data you want to include is in the RF Health report, select RF Health to view a list of all
available radio frequency information. Then, simply drag the desired data from the Available Options list on
the left to the Selected Options pane on the right.
The order of the data in the Selected Options section is the order that it will appear in the report. The data
can be reordered by dragging an item up or down the list.
4. Below the Custom Options panes are the Report Restrictions, Scheduling Options, Report Visibility, and
Email Options sections. Choose the parameters as needed for your report, especially a Report Start and
Report End.
5. When finished, select Add and Run to add the report to your list and run it immediately, Run Now to run
without being added to the list, Add to add but not run the report, or Cancel to exit this page.
Dell PowerConnect W-AirWave | User Guide
Description
Displays the beginning of the time period covered in the report.
Displays the end of the time period covered in the report.
In the Reports definitions for other roles section, this column indicates the roles for which additional reports
are defined.
Figure 166.
Creating, Running, and Emailing Reports | 229