Creating Amp Users - Dell PowerConnect W-Airwave User Manual

settings and default values in more detail. For more information on ensuring that AMP servers have the
correct time, please see
Table 19 AMP Setup > Network > Secondary Network Fields and Default Values
Setting
Primary
Secondary
3. On the AMP Setup > Network page, locate the Static Routes area. This section displays network, subnet
mask, and gateway settings that you have defined elsewhere from a command-line interface.
NOTE: This section does not enable you to configure new routes or remove existing routes.
4. Select Save when you have completed all changes on the AMP Setup > Network page, or select Revert to
return to the last settings. Save restarts any affected services and may temporarily disrupt your network
connection.
What Next?
Go to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter before proceeding.


Creating AMP Users

AMP installs with only one AMP user—the admin, who is authorized to:
define additional users with varying levels of privilege, be it manage read/write or monitoring.

limit the viewable devices as well as the level of access a user has to the devices.

Each general user that you add needs a Username, a Password, and a Role. Use unique and meaningful user
names as they are recorded in the log files when you or other users make changes in AMP.
NOTE: Username and password are not required if you configure AMP to use RADIUS or TACACS authentication. You do not need
to add individual users to the AMP server if you use RADIUS or TACACS authentication.
The user role defines the user type, access level, and the top folder for that user. User roles are defined on the
AMP Setup > Roles page. Refer to the next procedure in this chapter for additional information,
User Roles" on
The admin user can provide optional additional information about the user including the user's real name, email
address, phone number, and so forth.
Perform the following steps to display, add, edit, or delete AMP users of any privilege level. You must be an
admin user to complete these steps.
Dell PowerConnect W-AirWave | User Guide
http://support.ntp.org/bin/view/Servers/NTPPoolServers.
Default
ntp1.yourdomain.com
ntp2.yourdomain.com
page 45.
Description
Sets the IP address or DNS name for the primary NTP server.
Sets the IP address or DNS name for the secondary NTP server.
"Creating AMP
Configuring AMP | 43