Configuring Timeout, Login Message, Tacacs+ And Radius Authentication; Setting Up Login Configuration Options - Dell PowerConnect W-Airwave User Manual

Configuring Timeout, Login Message, TACACS+ and RADIUS
Authentication
As of 7.3, AMP uses session-based authentication with a configurable login message and idle timeout. As an
option, you can set AMP to use an external user database to simplify password management for AMP
administrators and users. This section contains the following procedures to be followed in AMP Setup >
Authentication:

Setting Up Login Configuration Options


Setting Up Login Configuration Options

Configuring RADIUS Authentication and Authorization

Integrating a RADIUS Accounting Server

Setting Up Login Configuration Options
Administrators can optionally configure AMP's user idle timeout or a message-of-the-day that appears across the
top of Home > Overview when a user first logs in, as shown in
Figure 22 Login configuration field and results in AMP Login page
1. Go to AMP Setup > Authentication.
2. Complete the fields described on
Table 22 Login Configuration section of AMP Setup > Authentication
Field
AMP User Idle
Timeout
Login message
3. Select Save if you are finished, or you can follow the next procedure to configure TACACS+ and RADIUS
Authentication options.
48 | Configuring AMP
Table 22:
Default Description
60 Number of minutes of idle time until AMP automatically ends the user session. Affects all
users of this AMP. The range is 10-240 minutes.
A persistent message that will appear for all of this AMP's users after they log in.
Figure 22:
Dell PowerConnect W-AirWave | Version 7.3