Tweaking A Planning Region - Dell PowerConnect W-Airwave User Manual

Table 155 Fields in the Autoprovision APs Window (Continued)
Field
Plan By Section
Coverage
Location
Number of APs
Other Section
Plan Sensors
Save Region as Walls
Update Environment
and Data Rate
Figure 234 Autoprovision APs Window Illustration
5. When you're finished selecting the desired options, select OK.

Tweaking a Planning Region

If the planning layout does not meet your expectations, you can edit by right-clicking within the region to see the
following options:
Delete Planned APs in the Region - deletes only provisioned APs in the region

Reprovision APs - remove all planned APs inside this region and prompts for new information to replan the

region
Delete the Region - deletes the region and all planned APs

Edit the region - change the name of the region

288 | Using VisualRF
Description
Coverage by Data Rate or Signal.
Plan for location accuracy. This mode will result in additional APs placed near the edge of the region
to aid in location calculation.
Number of APs to place in the planning region.
Whether to plan sensors into the region.
Whether to save the edges of the planning region as walls.
Whether to update the environment and data rate in case of changes.
Dell PowerConnect W-AirWave | Version 7.3