Viewing And Configuring Rapids Rules - Dell PowerConnect W-Airwave User Manual

Viewing and Configuring RAPIDS Rules

To view the RAPIDS rules that are currently configured on AMP, navigate to the RAPIDS > Rules page
119).
Figure 119 RAPIDS > Rules Page Illustration
Table 98
Table 98 RAPIDS > Rules Page
Field
Default Classification
Add New RAPIDS
Classification Rule
Rule Name
Classification
Threat Level
Enabled
Reorder Drag and Drop Icon
To create a new rule, select the Add button next to New RAPIDS Classification Rule to launch the RAPIDS
Classification Rule page (see
Figure 120 Classification Rule Page
Fill in the settings described in
170 | Using RAPIDS and Rogue Classification
defines the fields in the RAPIDS > Rules page.
Description
Sets the classification that a rogue device receives when it does not match any rules.
Select this button to create a RAPIDS classification rule.
Displays the name of any rule that has been configured. Rule names should be descriptive and
should convey the core purpose for which it was created.
Displays the classification that devices receive if they meeting the rule criteria.
Displays the numeric threat level for the rogue device that pertains to the rule. Refer to
Device Threat Level" on page 169
Displays the status of the rule, whether enabled or disabled.
Changes the sequence of rules in relation to each other. Select, then drag and drop, the icon for
any rule to move it up or down in relation to other rules. A revised sequence of rules must be
saved before rogues are classified in the revised sequence.
NOTE: The sequence of rules is very important for proper rogue classification. A device gets
classified by the first rule to which it complies, even if it conforms to additional rules later in the
sequence.
Figure
Table 98
for additional information.
120).
then select an option from the drop down menu.
Dell PowerConnect W-AirWave | Version 7.3
(Figure
"Rogue