Airwave Navigation Basics; Status Section - Dell PowerConnect W-Airwave User Manual

AirWave Navigation Basics

Every AirWave page contains three basic sections of the page:

Status Section


Navigation Section

Activity Section

AirWave pages also contain Help links with UI-specific help information and certain standard buttons.
Status Section
The Status section is a snapshot view of overall WLAN performance and provides direct links for immediate
access to key system components. AirWave includes the ability to customize the contents of the Status section
from the Home > User Info page, to include support for both wireless and wired network components. Refer to
"Configuring Your Own User Information with the Home > User Info Page" on
The table below describes these elements in further detail.
Table 5 Status Section Components of the AMP UI
Field
New Devices
Up
Down
Mismatched
Rogue
Users
Alerts
Severe Alerts
(conditional)
Device Types to
Include in Header
Stats
Search
22 | Installing and Getting Started in AirWave
Description
The number of wireless APs or wireless LAN controllers that have been discovered by AMP but not yet
managed by network administrators. When selected, AMP directs you to a page that displays a detailed list
of devices awaiting authorization.
The number of managed authorized devices that are currently responding to AMP requests. When selected,
AMP shows a detailed list of all Up devices.
The number of managed, authorized devices that are not currently responding to AMP SNMP requests.
When selected, AMP shows a detailed list of all Down devices.
The total number of Mismatched devices. A device is considered mismatched when the desired
configuration in AMP does not match the actual device configuration read from the device.
The number of devices that have been classified by the RAPIDS rules engine above the threshold defined on
the Home > User Info page.
The number of wireless users currently associated to the wireless network via all the APs managed by AMP.
When selected, AMP shows a list of users that are associated.
Displays the number of non-acknowledged AMP alerts generated by user-configured triggers. When
selected, AMP shows a detailed list of active alerts.
When triggers are given a severity of Critical, they generate Severe Alerts. When a Severe Alert exists, a
new component appears at the right of the Status field in bold red font. Only users configured on the Home >
User Info page to be enabled to view critical alerts can see Severe Alerts. The functionality of Severe Alerts
is the same as that described above for Alerts. Unlike Alerts, the Severe Alerts section is hidden if there are
no Severe Alerts.
You can support statistics for any combination of the following device types:
Autonomous APs

Controllers

Routers/Switches

Thin APs

Universal Devices

Refer to "Configuring Your Own User Information with the Home > User Info Page" on page 211.
Search performs partial string searches on a large number of fields including the notes, version, secondary
version, radio serial number, device serial number, LAN MAC, radio MAC and apparent IP of all the APs as
well as the client MAC, VPN user, LAN IP, VPN IP fields.
page 211.
Dell PowerConnect W-AirWave | Version 7.3