Using The New Users Report; Using The Pci Compliance Report - Dell PowerConnect W-Airwave User Manual

Using the New Users Report

The New Users Report lists all new users that have appeared on the network during the time duration defined for
the report. This report covers the user identifier, the associated role when known, device information and more.
The report definition can filter on connection mode (wired, wireless or both).
Figure 177
Figure 177 Reports > Generated > New Users Report Illustration

Using the PCI Compliance Report

AMP supports PCI requirements in accordance with the Payment Card Industry (PCI) Data Security Standard
(DSS). The PCI Compliance Report displays current PCI configurations and status as enabled on the network.
Verify that AMP is enabled to monitor compliance with PCI requirements, as described in the
Disabling PCI Auditing" on
In addition to citing simple pass or fail status with regard to each PCI requirement, AMP introduces very detailed
diagnostic information to recommend the specific action or actions required to achieve Pass status, when
sufficient information is available. Refer to the
information about enabling PCI on the network. The configurations in that section enable or disable the contents
of the PCI Compliance Report that is viewable on the Reports > Generated page.
Figure 178
Figure 178 Reports > Generated > PCI Compliance Report Illustration Example
Dell PowerConnect W-AirWave | User Guide
illustrates the fields and information in the New Users Report.
page 66.
illustrates the fields and information in a PCI Compliance Report.
"Auditing PCI Compliance on the Network" on page 65
Creating, Running, and Emailing Reports | 243
"Enabling or
for