Assigning Devices To The Ignored Page; Monitoring Devices - Dell PowerConnect W-Airwave User Manual

W-airwave 7.3 user guide
Hide thumbs Also See for PowerConnect W-Airwave:
Table of Contents

Advertisement

AMP supports MIB-II interfaces and polls in/out byte counts for up to two interfaces. AMP also monitors
sysUptime.

Assigning Devices to the Ignored Page

There are two ways a device can be assigned to the Ignored page: from the APs/Devices > New page, or from the
APs/Devices > Manage page. The advantage of having the device be designated in this way, as in the case of a
device that is temporarily down for a known reason, is that when you take it off the ignored list, it returns
immediately to the location in AMP where it had resided before it was marked Ignored.
Ignored devices are not displayed in APs/Devices > New if discovered in subsequent scans.
Deleted devices will be listed on the APs/Devices > New if discovered in subsequent scans.
Perform these steps to further process or return an ignored device to a managed status.
1. To view all devices that are ignored, go to the APs/Devices > Ignored page, illustrated in
Figure 76 APs/Devices > Ignored Page Illustration, with filtered Controller column
This page provides the following information for any ignored device:
device name or MAC address, when known
controller associated with that device
device type
device IP address
LAN MAC address for the LAN on which the device is located
date and time of device discovery
2. To change the device parameters for a given device, select its checkbox and adjust group, folder, monitor, and
manage settings as desired.
3. Select Add to add the device to AMP so that it appears on the APs/Devices > New list.
4. The Unignore button will either return the device to its regular folder or group, or send it to the APs/
Devices > New page.

Monitoring Devices

This section discusses various device monitoring options and includes the following sections:
Viewing Device Monitoring Statistics
Understanding the APs/Devices > Monitor Pages for All Device Types
Evaluating Radio Statistics for an AP
Monitoring Data for Mesh Devices
Monitoring Data for Wired Devices (Routers and Switches)
Understanding the APs/Devices > Interfaces Page
114 | Discovering, Adding, and Managing Devices
Figure
Dell PowerConnect W-AirWave | Version 7.3
76.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-airwave 7.3

Table of Contents