Dell PowerConnect W-Airwave User Manual page 184

Figure 130 Add New Trigger Page Illustration
2. Configure the Trigger Restrictions and Alert Notifications. This configuration is consistent regardless of the
trigger type to be defined.
a. The Trigger Restrictions settings establishes how widely or how narrowly the trigger applies. Define the
folder, subfolder, and Group covered by this trigger.
restrictions.
Table 105 System > Trigger Details Fields and Default Values
Notification Option
Folder
Include Subfolders
Group
184 | Performing Daily Administration in AirWave
Description
Sets the trigger to apply only to APs/Devices in the specified folder or subfolders depending on the
Include Subfolders option.
NOTE: If the trigger is restricted by folder and group, it only applies to the intersection of the two—it
only applies to APs in the group and in the folder.
Sets the trigger to apply to all devices in the specified folder and all of the devices in folders under
the specified folder.
Sets the trigger to apply only to APs/Devices in the specified group.
NOTE: If the trigger is restricted by folder and group, it only applies to the intersection of the two—it
only applies to APs in the group and in the folder.
Table 105 describes the options for trigger
Dell PowerConnect W-AirWave | Version 7.3