Dell PowerConnect W-Airwave User Manual page 193

Use the Filter icon (

to filter the results by one of the values under that column.You can filter the list by substring match under the
Username column.
The Users > Connected page includes SSID information for users, and can display wired users using remote
Access Point (RAP) devices in tunnel and split-tunnel mode.
Figure 135 Users > Connected Page Illustration (Partial View)
Table 114 Users > Connected Table Columns and Links (Alphabetical)
Field
AP Radio
AOS Device Type The type of device determined by the Dell PowerConnect W controller -- a fallback in case the rules set in
AP/Device
Association Time The first time AMP recorded the user for this association.
Auth. Time
Auth. Type
BW
Ch BW
Dell PowerConnect W-AirWave | User Guide
) next to certain columns (AP/Device, Role, VLAN, Connection Mode, and others)
Description
The radio type of the radio that the user is associated with.
AMP Setup > Device Type Setup were unable to determine the device type.
Displays the name of the AP to which the MAC address is associated as a link to this AP's APs/Devices >
Monitor page.
The how long ago the user authenticated.
NOTE: This value displays as a negative number for unauthenticated users.
The type of authentication employed by the user:
WPA2 (EAP-PEAP) is the standard setting.

EAP is reported by Dell PowerConnect W devices and Cisco VxWorks via SNMP traps.

RADIUS accounting servers integrated with AMP will provide the RADIUS Accounting Auth type.

Web (PAP) - Captive Portal.

All others are considered to be not authenticated.

The average bandwidth consumed by the MAC address.
The channel bandwidth that currently supports 802.11n users.
Performing Daily Administration in AirWave | 193