Classifying Dell Powerconnect W Devices In User Detail - Dell PowerConnect W-Airwave User Manual

Figure 141 Device Info section in Users > User Detail after Show additional properties is selected

Classifying Dell PowerConnect W Devices in User Detail

If you have deployed Dell PowerConnect W controllers and have WMS Offload enabled on the network, the
Users > User Detail page allows you to classify the device in the Device Information section, and to push this
configuration to the Dell PowerConnect W controllers that govern the devices. The classifications are as follows:
Unclassified—Devices are unclassified by default.

Valid—If the Protect Valid Stations option is enabled, this setting designates the device as a legitimate

network device. Once this Valid setting is pushed, this setting prevents valid stations from connecting to a
non-valid AP.
Contained—When this status is pushed to the device, Dell PowerConnect W controllers will attempt to keep

it contained from the network.
You can classify the user regardless of whether WMS Offload is enabled. If WMS Offload is enabled, the
classification will get pushed up to the controller.
200 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave | Version 7.3