Dell PowerConnect W-Airwave User Manual page 41

Table 16 AMP Setup > General > Additional AMP Services Fields and Default Values (Continued)
Setting
Use embedded mail
server
Process user roaming
traps from Cisco WLC
Enable AMON data
collection
10. Locate the Performance section. Performance tuning is unlikely to be necessary for many AMP
implementations, and likely provides the most improvements for customers with extremely large Pro or
Enterprise installations. Please contact Dell support at
change any of these settings.
Table 17 AMP Setup > General > Performance Fields and Default Values
Setting
Monitoring
Processes
Maximum number of
configuration
processes
Maximum number of
audit processes
Verbose Logging of
SNMP Configuration
SNMP Rate Limiting
for Monitored
Devices
RAPIDS Processing
Priority
11. Select Save when the General Server settings are complete and whenever making subsequent changes.
Dell PowerConnect W-AirWave | User Guide
Default Description
Yes Enables or disables the embedded mail server that is included with AMP.This field
supports a Send Test Email button for testing server functionality. This button prompts you
with a To and From field in which you must enter valid email addresses, and a button to
send a test email.
Yes Whether AMP should parse client association and authentication traps from Cisco WLC
controllers to give real time information on users connected to the wireless network.
Yes Allows AMP to collect enhanced data from Dell PowerConnect W-Series devices on
certain firmware versions; see the Dell PowerConnect W-AirWave Best Practices Guide
for more details.
Table 17 describes the settings and default values of this section.
Default Description
Based on the Optional setting configures the throughput of monitoring data. Increasing this
number of setting allows AMP to process more data per second, but it can take resources
cores for your away from other AMP processes. Please contact Dell support at at
server support.dell.com
network.
5 Increases the number of processes that are pushing configurations to your
devices, as an option. The optimal setting for your network depends on the
resources available, especially RAM. Please contact Dell support at
support.dell.com
network.
3 Increases the number of processes that audit configurations for your devices,
as an option. The optimal setting for your network depends on the resources
available, especially RAM. Contact Dell support at
considering increasing this setting for your network.
No Enables or disables logging detailed records of SNMP configuration
information.
No When enabled, AMP fetches SNMP data more slowly, potentially reducing
device CPU load. Enable this global setting when monitoring Dell PowerConnect
W controllers only if your network contains a majority of legacy controllers (800,
2400, 5000, controllers that use Supervisor Module II).
NOTE: If your network mainly uses newer processors (3000 series, 600 series,
the M3 module in the 6000 series), disabling this setting is strongly
recommended.
Low Defines the processing and system resource priority for RAPIDS in relation to
AMP as a whole.
When AMP is processing data at or near its maximum capacity, reducing the
priority of RAPIDS can ensure that processing of other data (such as client
connections and bandwidth) is not adversely impacted.
The default priority is Low. You can also tune your system performance by
changing group poll periods.
support.dell.com if you think you might need to
if you think you might need to increase this setting for your
if you think you might need to increase this setting for your
support.dell.com if you are
Configuring AMP | 41