Assigning An Ip Address (For Ipv4 Mode) - Fuji Xerox DocuPrint CM405 df User Manual

Printers
Hide thumbs Also See for DocuPrint CM405 df:
Table of Contents

Advertisement

 Assigning an IP Address (for IPv4 Mode)
NOTE:
When you assign an IP address manually in IPv6 mode, use the CentreWare Internet Services. To display the CentreWare
Internet Services, use the link local address. To check a link local address, see
Page" on page
97.
Assigning an IP address is considered as an advanced function and is normally done by a system administrator.
Depending on the address class, the range of the IP address assigned may be different. On Class A, for example, an IP
address in the range from
your system administrator.
You can assign the IP address by using the operator panel.
1
Turn on the printer.
2
Ensure that Ready message appears on the LCD panel.
3
On the operator panel, press the
4
Select Tools tab.
5
Select Admin Settings.
6
Select Network.
7
Select Ethernet.
8
Select TCP/IP.
9
Select Get IP Address.
10
Select Panel, and then select OK.
11
Ensure that the message This Settings Becomes Effective after Restart. appears, and then
select Close.
12
Select IP Address.
The cursor is located at the first octet of the IP address.
13
Enter the value of the IP address using the number pad.
14
Select
.
The cursor moves to the next octet.
15
Repeat steps
13
to
16
Ensure that the message This Settings Becomes Effective after Restart. appears, and then
select Close.
17
Select Subnet Mask.
The cursor is located at the first octet of the subnet mask.
18
Enter the value of the subnet mask using the number pad.
19
Select
.
The cursor moves to the next octet.
20
Repeat steps
18
to
21
Ensure that the message This Settings Becomes Effective after Restart. appears, and then
select Close.
22
Select Gateway Address.
The cursor is located at the first octet of the gateway address.
96
Printer Connection and Software Installation
to
0.0.0.0
127.255.255.255
(System) button.
14
to set all of the digits in the IP address, and then select OK.
19
to set the subnet mask, and then select OK.
"Printing and Checking the System Settings
will be assigned. For assignment of IP addresses, contact

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents