Margin Middle - Fuji Xerox DocuPrint CM115 w User Manual

 Margin Middle
You can specify the middle margin of the copy.
1
Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the Copy button.
3
Select Margin Middle, and then press the
4
Press the or
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
0mm*/0.0 inch*
0 – 50mm/0.0 – 2.0 inch
5
If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6
Press the (Start) button to start copying.
130 Copying
button or enter the desired value using the numeric keypad, and then press the
Specify the value in increments of 1 mm/0.1 inch.
button.
button.