In This Chapter; Global Rules - Barco ScreenPRO-II User Manual

4. Menu Orientation

Global Rules

däçÄ~ä=oìäÉë
The following global rules apply to all menus:
•
•
•
•
•
•
86
Brackets — parameters and values displayed between brackets (e.g., [525] )
cannot be changed.
ID "All" — For widescreen destinations, when the value " All " is shown for the ID
parameter, it represents the lowest numbered ID in the destination, as configured
(typically, number 1).
Exclamation Points — For widescreen destinations, if an exclamation point ( ! )
appears after a value (e.g., Contrast 100! ), one (or more) of the destinations is
not set to 100 .
"All" Adjustments — For widescreen destinations, if a parameter is adjusted on
a menu displaying an " All " ID condition, all values for all ScreenPRO-II's in the
destination will snap to the new value. To adjust an individual ScreenPRO-II's
values within the widescreen configuration, highlight the ID line, use the ADJ knob
to select a specific destination, and then adjust a parameter in the normal manner.
Press { HOME } to return to the Home Menu .
Press { BACK } to return to the menu from which you accessed the current menu.
Note The { HOME } and { BACK } buttons will not be explained again

in this chapter.

ScreenPRO-II Controller • User's Guide