Keypad Backlight Menu - Barco ScreenPRO-II User Manual

4. Menu Orientation
Miscellaneous Menu
Please note the following important points regarding EDID:
•
•
hÉóé~Ç=_~ÅâäáÖÜí=jÉåì
From the Miscellaneous Menu , press
Menu :
H
O
M
E
B
A
C
K
Figure 4-41. Keypad Backlight Menu (sample)
The Keypad Backlight Menu enables you to adjust the backlight level of all buttons on the
ScreenPRO-II Controller.
The following functions are provided:
•
138
For the computer to correctly see the EDID data:
a. Turn on ScreenPRO-II power.
b. Connect the DVI cable from the computer's video card to one of
ScreenPRO-II's DVI connectors.
c. Boot the computer.
d. Once EDID programming is complete, you will be prompted to power
down the external computer, power it back on again, and then ensure
that the computer's format is set to match.
A ScreenPRO-II's EDID prom is not reset to any default during a factory reset. To
change the EDID, you must use the EDID DVI Input Format Menu .
KEYPAD BACKLIGHT
Keypad Backlight
Keypad Backlight — adjusts the backlight level. Backlight range is 0 (backlight
off) to 100 (backlight on full).
{ }
LIGHT ADJUST to show the Keypad Backlight
10
ScreenPRO-II Controller • User's Guide
A
D
J