Barco ScreenPRO-II User Manual page 38

2. Hardware Orientation
Front Panel Sections
qçìÅÜ=pÅêÉÉå=jÉåì=pÉÅíáçå
The figure below illustrates the Touch Screen Menu Section . A sample menu is shown
for reference.
1
Figure 2-2. Touch Screen Menu Section
1) Softkeys
Following are descriptions of each area:
1)
2)
38
PIP ADJUSTMENT
H
O
H Size < 37.3% >
M
E
V Size < 58.9% >
B H Position
O
R
V Position
D
R
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S
Move Rate
H
D
O
Key Frame Effect
W
OPERATION:
E
JOY Z TO SIZE, X Y TO POSITION
F
X
TRACK SIZE
2) Touch Screen
Softkeys
Eight un-labeled softkeys are provided — four to the left of the Touch Screen and
four below. Softkey labels (when present) appear on the Touch Screen itself.
Press the adjacent softkey to access the menu or activate the indicated function.
Touch Screen
On the Touch Screen, all menus and functions can be accessed in a variety of
different ways:
~
Touch the desired button on the Touch Screen itself (for example, the
{ BORDR } { SHDOW }
or
~
Press a Softkey that is directly adjacent to a button label.
~
Use the top NAV knob to move the highlight to the desired line, then use
the ADJ rotary knob to adjust the value.
~
Touch a particular line to move the highlight to that line, then use the
ADJ rotary knob to adjust the value.
Important When adjusting parameters, there is no Enter button. If you
adjust a value with the knobs or the softkeys, that function,
parameter or value is immediately active in Preview.
674
N
452
A
-34 V
70
[ 2.0 ]
[ LINEAR ]
A
D
J
2
3) Rotary Knobs
buttons) to access the menu as indicated.
ScreenPRO-II Controller • User's Guide
3