Barco ScreenPRO-II User Manual page 122

4. Menu Orientation
System Menu
•
122
~
ImagePRO Input or PrePRO-II Input — selects the ImagePRO or
PrePRO-II input to which the analog router output is connected.
In the SDI section:
~
SDI Router Name — selects the router from which SDI sources will be
routed to the ImagePRO or PrePRO-II.
~
SDI Router Output — selects the specific router output designated as
Aux (as assigned on the router's Output Patch Menu ).
~
ImagePRO Input or PrePRO-II Input — selects the ImagePRO or
PrePRO-II input to which the SDI router output is connected.
ScreenPRO-II Controller • User's Guide