Barco ScreenPRO-II User Manual page 125

fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì
From the System Menu , press
B
A
C
K
Figure 4-29. Input Source Patch Menu (sample)
The Input Source Patch Menu enables you to associate (patch) specific router inputs to
specific source buttons on the ScreenPRO-II Controller. The menu also enables you to
assign tallies, and select connections to the ScreenPRO-II units.
The following functions are provided:
•
•
ScreenPRO-II Controller • User's Guide
{
INPUT PATCH
INPUT SOURCE PATCH
Source Number
Connection Type
Router Input
Tally Number
Press "ADD PATCH" to log change
Important The fields that are shown on the Input Source Patch Menu
change depending upon the selected Connection Type .
Important From a conceptual standpoint, there are no "direct"
connections to a ScreenPRO-II scaler. All connections,
whether they are from a single source or an external router,
connect to each ScreenPRO-II's internal router matrix.
Source Number — selects the source button on the Controller that you want to
patch. The selection range is 1 - 16 . The source is chosen with the ADJ knob —
not with the source buttons.
Connection Type — determines how the selected source is connected:
~
From a router — choose between up to eight MATRIXPRO routers, or a
third party router (e.g., SIERRA , LEITCH , etc.) as selected on the
Router Specification Menu .
~
To ScreenPRO-II's internal matrix
ScreenPRO-II ID . The " ALL SP " selection assumes connections from
4. Menu Orientation
}
to display the Input Source Patch Menu .
1
MATRIXPRO1
1
1
ADD DELETE
PATCH PATCH
— choose ALL SP or an individual
System Menu
N
A
V
A
D
J
125