Barco ScreenPRO-II User Manual page 220

6. Operations
Operational Configuration
råÇÉêëí~åÇáåÖ=o~ëíÉê=_çñÉë
With ScreenPRO-II Controller, Raster Boxes are always enabled on Preview, each PIP or
Key is surrounded by a thin border that helps you identify the PIP or Key's original layer.
•
•
Figure 6-5. Raster Box Styles (sample)
•
•
Figure 6-6. Raster Box Visibility (sample)
Remember that Raster Box size can be adjusted:
1.
2.
3.
4.
220
The PIP or Key with a red "corner" style raster box is Layer A .
The PIP or Key with a red "dashed" raster box is Layer B .
PIP B
PIP A
The "blinking" raster box is always the one enabled for modification, and its
corresponding layer button will blink.
Raster boxes that are underneath other layers (such as another PIP, the DSK or
the LOGO) are still visible on Preview.
PIP A
PIP B
From the Home Menu , press OUTPUT to display the Output Menu .
On the Destination Bus , select the destination that you want to configure.
{ }
Press SETTINGS to display the Settings Menu .
On the Raster Box Size line, set the size of the raster box that appears around
PIPs and Keys.
ScreenPRO-II Controller • User's Guide