Barco ScreenPRO-II User Manual page 244

6. Operations
Working with Presets
píçêáåÖ=mêÉëÉíë
Use the following steps to store a preset:
1.
Page
2.
Learn
3.
oÉÅ~ääáåÖ=mêÉëÉíë
Use the following steps to recall a preset:
1.
2.
3.
aÉäÉíáåÖ=mêÉëÉíë
Use the following steps to delete a preset:
1.
Delete
2.
rëáåÖ=kÉñí=~åÇ=mêÉîáçìë
Use the following steps to utilize the Next function:
1.
Next
2.
244
Set up the desired "look" on Preview. Remember that one preset equals a single
"look" of the Controller, including the current state of all mixers, layers, sources,
and the DSK.
Select the "page" on which you want to store the preset. In the Preset Section ,
hold down Page , then press the desired Preset button. The Red LED above the
button lights to indicate the current page.
To store the preset, press Learn + the desired Preset button. The Touch Screen
displays a confirmation message, and the overall look of the Controller is now
saved into that register.
Check the available resources on Program. If the resources (layers) that you wish
to recall are already in use on Program, they must first be cleared before the
"recall" is permitted.
Select the "page" from which you want to recall the preset. In the Preset Section ,
hold down Page , then press the desired Preset button. The Red LED above the
button lights to indicate the current page.
To recall a Preset, simply press the desired Preset button to recall the stored
"look" to Preview.
Select the "page" from which you want to delete a preset. In the Preset Section ,
hold down Page , then press the desired Preset button.
In the Preset Section , hold down Delete , then press the desired Preset button to
delete that register from memory. The Touch Screen displays a confirmation
message.
Check the available resources on Program. If the resources (layers) that you wish
to recall are already in use on Program, they must first be cleared before the
"recall" is permitted.
In the Preset Section , press Next to recall the next valid Preset in sequential
order. Please note:
~
If Preset 2 is lit, pressing Next recalls Preset 3 .
~
If Preset 6 is active on page 2 , pressing Next advances to Preset 1 on
page 3 .
ScreenPRO-II Controller • User's Guide