Barco ScreenPRO-II User Manual page 121

•
•
•
•
B
A
C
K
Figure 4-27. Aux Setup Menu — ImagePRO Aux Destination (sample)
The following functions are provided:
•
•
•
•
ScreenPRO-II Controller • User's Guide
Source Mapping — two selections are available:
~
Input Patch — maps Aux sources according to how your inputs are
patched to buttons in the console's Source Selection bus.
~
Direct Map — maps the Source Selection bus as a 1:1 map of your
router inputs — for this destination only.
Router Name — selects the router from which the Aux sources will be output.
Router Output — selects the specific router output designated as an Aux (as
assigned on the router's Output Patch Menu ).
Press { RESET } to return all fields to < UNDEFINED >.
For ImagePRO Aux and PrePRO-II Aux destinations, press { AUX SETUP }
to display the Aux Setup Menu :
AUX SETUP
Source Mapping
ImagePRO ID:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ANALOG Router Name
ANALOG Router Output
ImagePRO Input:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SDI Router Name
SDI Router Output
Top Line — displays the selected Aux destination number.
Source Mapping — two selections are available:
~
Input Patch — maps Aux sources according to how your inputs are
patched to buttons in the console's Source Selection section.
~
Direct Map — maps Aux sources according to how your inputs are
connected to the router.
ImagePRO ID or PrePRO-II ID — selects the ID of the ImagePRO or PrePRO-II,
to which you want to route Aux sources.
In the Analog section:
~
Analog Router Name — selects the router from which analog sources
will be routed to the ImagePRO or PrePRO-II.
~
Analog Router Output — selects the specific router output designated
as Aux (as assigned on the router's Output Patch Menu ).
4. Menu Orientation
AUX_2
N
Input Patch
A
V
17
MATRIXPRO1
7
1
MATRIXPRO2
A
D
J
8
RESET
System Menu
121