Show Spanning-Tree Mst Port Summary; Show Spanning-Tree Mst Summary; Show Spanning-Tree Summary - Planet WGSW-24000 User Manual

▫ Point To Point MAC Status - Derived value indicating if this port is part of a point to point link.
▫ CST Regional Root - The regional root identifier in use for this port.
▫ CST Port Cost - The configured path cost for this port.

11.1.5 show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter <mstid> indicates a particular MST instance. The parameter {<slot/port> | all}
indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is displayed for
one or all ports within the common and internal spanning tree.
▫
Format show spanning-tree mst port summary <mstid> {<slot/port> | all}
▫
Mode Privileged EXEC and User EXEC
▫ MST Instance ID - The MST instance associated with this port.
▫ Slot/Port - The interface being displayed
▫ Type - Currently not used.
▫ STP State - The forwarding state of the port in the specified spanning tree instance
▫ Port Role - The role of the specified port within the spanning tree.
▫ Link Status - The operational status of the link. Possible values are "Up" or "Down".
▫ Link Trap - The link trap configuration for the specified interface.

11.1.6 show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the switch. On
execution, the following details are displayed.
▫
Format show spanning-tree mst summary
▫
Mode Privileged EXEC and User EXEC
▫
MST Instance ID List - List of multiple spanning trees IDs currently configured.
▫
For each MSTID:
Associated FIDs - List of forwarding database identifiers associated with this instance.
Associated VLANs - List of VLAN IDs associated with this instance.

11.1.7 show spanning-tree summary

This command displays spanning tree settings and parameters for the switch. The following details are
displayed on execution of the command.
▫
Format show spanning-tree summary
▫
Mode Privileged EXEC and User EXEC
▫ Spanning Tree Adminmode - Enabled or disabled.
▫ Spanning Tree Version - Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or
IEEE 802.1d) based upon the Force Protocol Version parameter