Set Prompt; Show Forwardingdb Agetime; Show Network - Planet WGSW-24000 User Manual

▫
Default 5
▫
Format serial timeout <0 - 160>
▫
Mode Line Config
8.5.11.1 no serial timeout
This command sets the maximum connect time (in minutes) without console activity to 5.
▫
Format no serial timeout
▫
Mode Line Config

8.5.12 set prompt

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
▫
Format set prompt <prompt string>
▫
Mode Privileged EXEC

8.5.13 show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter is
required.
▫
Default all
▫
Format show forwardingdb agetime [fdbid | all]
▫
Mode Privileged EXEC
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding database whose aging
timeout is to be shown. The all option is used to display the aging timeouts associated with all forwarding
databases. This field displays the forwarding database ID in an IVL system.
Agetime Displays the address aging timeout for the associated forwarding database in IVL.

8.7.14 show network

This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of the
switch's front panel ports. The configuration parameters associated with the switch's network interface do
not affect the configuration of the front panel ports through which traffic is switched or routed.
▫
Format show network
▫
Mode Privileged EXEC and User EXEC
▫ IP Address - The IP address of the interface. The factory default value is 0.0.0.0
▫ Subnet Mask - The IP subnet mask for this interface. The factory default value is 0.0.0.0
▫ Default Gateway - The default gateway for this IP interface. The factory default value is 0.0.0.0
▫ Burned In MAC Address - The burned in MAC address used for in-band connectivity.
▫ Locally Administered MAC Address - If desired, a locally administered MAC address can be