Table of Contents
Advertisement
4.5.2.8 DiffServ Service Configuration
Use this page to define the DiffServ policy on each port.
Slot.Port - Select the Slot.Port that uniquely specifies an interface. This is a list of all valid
slot number and port number combinations in the system. For Read/Write users where 'All'
appears in the list, select it to specify all interfaces.
Policy In - This lists all the policy names of type 'In' from which one can be selected. If
'none' is selected, this will detach the policy from the interface in this direction. This field is
not shown for Read/Write users where inbound service policy attachment is not supported
by the platform.
Policy Out - This lists all the policy names of type 'Out' from which one can be selected. If
'none' is selected, this will detach the policy from the interface in this direction. This field is
not shown for Read/Write users where outbound service policy attachment is not supported
by the platform.
Figure 4-88 DiffServ Policy Attribute Summary
Advertisement
Table of Contents
