Bandwidth Kbps; Bandwidth Percent - Planet WGSW-24000 User Manual

9.5.1 bandwidth kbps

This command identifies a minimum amount of bandwidth to be reserved for the specified class instance
within the named policy using an absolute rate notation. The committed information rate is specified in
kilobits-per-second (Kbps) and is an integer from 1 to 4294967295.
Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in a
particular direction.
Note: The bandwidth kbps and percent commands are alternative ways to specify the same bandwidth
policy attribute.
▫
Format bandwidth kbps <1-4294967295>
▫
Mode Policy-Class-Map Config
▫ Restrictions - The sum of the committed information rate values for all bandwidth and expedite
commands defined within a policy must not exceed the available link bandwidth of the interface to
which that policy is assigned. Violation of this requirement shall prevent successful attachment of a
policy to the interface, or shall cause this command to fail if the policy is already in service on one
or more interfaces.
▫ Policy Type - Out
▫ Incompatibilities - Expedite (all forms)

9.5.2 bandwidth percent

This command identifies a minimum amount of bandwidth to be reserved for the specified class instance
within the named policy using a relative rate notation. The committed information rate is specified as a
percentage of total link capacity and is an integer from 1 to 100.
Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in a
particular direction.
The bandwidth kbps and percent commands are alternative ways to specify the same
Note
:
bandwidth policy attribute.
▫
Format bandwidth percent <1-100>
▫
Mode Policy-Class-Map Config
▫ Restrictions - The sum of the committed information rate values for all bandwidth and expedite
commands defined within a policy must not exceed the available link bandwidth of the interface to
which that policy is assigned. Violation of this requirement shall prevent successful attachment of a
policy to the interface, or shall cause this command to fail if the policy is already in service on one
or more interfaces.
▫ Policy Type - Out
▫ Incompatibilities - Expedite (all forms)