Auto-Negotiate; Auto-Negotiate All; Delete Interface; Deleteport - Planet WGSW-24000 User Manual

8.6.2 auto-negotiate

This command enables automatic negotiation on a port. The default value is enable.
▫
Format auto-negotiate
▫
Mode Interface Config
8.6.2.1 no auto-negotiate
This command disables automatic negotiation on a port.
▫
Format no auto-negotiate
▫
Mode Interface Config

8.6.3 auto-negotiate all

This command enables automatic negotiation on all ports. The default value is enable.
▫
Format auto-negotiate all
▫
Mode Global Config
8.6.3.1 no auto-negotiate all
This command disables automatic negotiation on all ports.
▫
Format no auto-negotiate all
▫
Mode Global Config

8.6.4 delete interface

This command deletes an existing port-channel (LAG) from the configuration. The interface is a logical
slot and port for a configured port-channel. The all option removes all configured port-channels (LAGs).
▫
Format delete interface { <logical slot/port> | all}
▫
Mode Interface Config

8.6.5 deleteport

This command deletes the port from the port-channel (LAG). The interface is a logical slot and port
number of a configured port-channel.
▫
Format deleteport <logical slot/port>
▫
Mode Interface Config

8.6.6 macfilter

This command adds a static MAC filter entry for the MAC address <macaddr> on the VLAN <vlanid>.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to 01:80:C2:00:00:0F,
01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.