Table of Contents
Advertisement
4.3.1.2 VLAN Status
This page displays the status of all currently configured VLANs.
VLAN ID - The VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is (1 to 4093) .
VLAN Name - The name of the VLAN. VLAN ID 1 is always named `Default`.
VLAN Type - The VLAN type:
Default ( VLAN ID = 1) -- always present
Static -- a VLAN you have configured
Dynamic -- a VLAN created by GVRP registration that you have not converted to
static, and that GVRP may therefore remove
4.3.1.3 VLAN Port Configuration
Selection Criteria
Slot.Port - Select the physical interface for which you want to display or configure data.
Select 'All' to set the parameters for all ports to same values.
Configurable Data
Port VLAN ID - Specify the VLAN ID you want assigned to untagged or priority tagged
frames received on this port. The factory default is 1.
Acceptable Frame Types - Specify how you want the port to handle untagged and priority
tagged frames. If you select 'VLAN only', the port will discard any untagged or priority tagged
frames it receives. If you select 'Admit All', untagged and priority tagged frames received on
the port will be accepted and assigned the value of the Port VLAN ID for this port. Whichever
you select, VLAN tagged frames will be forwarded in accordance with the IEEE 802.1Q
VLAN standard. The factory default is 'Admit All'.
Ingress Filtering - Specify how you want the port to handle tagged frames. If you enable
Figure 4-36 VLAN Status
Advertisement
Table of Contents
