Macfilter Addsrc; Macfilter Addsrc All - Planet WGSW-24000 User Manual

This command removes all ports from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format no macfilter adddest all <macaddr> <vlanid>
▫
Mode Global Config

8.6.9 macfilter addsrc

This command adds the interface to the source filter set for the MAC filter with the MAC address of
<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format macfilter addsrc <macaddr> <vlanid>
▫
Mode Interface Config
8.6.9.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address of
<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format no macfilter addsrc <macaddr> <vlanid>
▫
Mode Interface Config

8.6.10 macfilter addsrc all

This command adds all interfaces to the source filter set for the MAC filter with the MAC addressf
<macaddr> and <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number
in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format macfilter addsrc all <macaddr> <vlanid>
▫
Mode Global Config
8.6.10.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of
<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format no macfilter addsrc all <macaddr> <vlanid>
▫
Mode Global Config