Table of Contents
Advertisement
each GARP participant for each port.
Leave All Time (centiseconds) - The Leave All Time controls how frequently LeaveAll
PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly be
deregistered. Participants will need to rejoin in order to maintain registration. The Leave All
Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime.
The timer is specified in centiseconds. Enter a number between 200 and 6000 (2 to 60
seconds). The factory default is 1000 centiseconds (10 seconds). An instance of this timer
exists for each GARP participant for each port.
4.3.5 IGMP Snooping
4.3.5.1 IGMP Snooping Configuration and Status
Use this menu to configure the parameters for IGMP Snooping, which is used to build forwarding lists for
multicast traffic. Note that only a user with Read/Write access privileges may change the data on this
screen.
Configurable Data
Admin Mode - Select the administrative mode for IGMP Snooping for the switch from the
pull-down menu. The default is disable.
Group Membership Interval - Specify the amount of time you want the switch to wait for a
report for a particular group on a particular interface before it deletes that interface from the
group. Enter a value between 1 and 3600 seconds. The default is 260 seconds.
Max Response Time - Specify the amount of time you want the switch to wait after sending
a query on an interface because it did not receive a report for a particular group on that
interface. Enter a value greater or equal to 1 and less than the Group Membership Interval
Figure 4-46 GARP Port Configuration
Advertisement
Table of Contents
