Table of Contents
Advertisement
Ingress Filtering on the pulldown menu, a tagged frame will be discarded if this port is not a
member of the VLAN identified by the VLAN ID in the tag. If you select disable from the
pulldown menu, all tagged frames will be accepted. The factory default is disable.
Port Priority - Specify the default 802.1p priority assigned to untagged packets arriving at
the port.
4.3.1.4 VLAN Port Summary
This page shows the configured VLAN parameters.
Slot.Port - The interface.
Port VLAN ID - The VLAN ID that this port will assign to untagged frames or priority tagged
frames received on this port.
Acceptable Frame Types - Specifies the types of frames that may be received on this port.
The options are 'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames
or priority tagged frames received on this port are discarded. When set to 'Admit All',
untagged frames or priority tagged frames received on this port are accepted and assigned
the value of the Port VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance to the 802.1Q VLAN specification.
Ingress Filtering - When enabled, the frame is discarded if this port is not a member of the
VLAN with which this frame is associated. In a tagged frame, the VLAN is identified by the
VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified for the
port that received this frame. When disabled, all frames are forwarded in accordance with
the 802.1Q VLAN bridge specification. The factory default is disabled.
Figure 4-37 VLAN Port Configuration
Advertisement
Table of Contents
