Planet WGSW-24000 User Manual page 234

be a value in the range 1 - 65535.
▫ quiet-period: Sets the value, in seconds, of the timer used by the authenticator state machine on
this port to define periods of time in which it will not attempt to acquire a supplicant. The
quiet-period must be a value in the range 0 - 65535.
▫ tx-period: Sets the value, in seconds, of the timer used by the authenticator state machine on this
port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The
quiet-period must be a value in the range 1 - 65535.
▫ supp-timeout: Sets the value, in seconds, of the timer used by the authenticator state machine on
this port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.
▫ server-timeout: Sets the value, in seconds, of the timer used by the authenticator state machine
on this port to timeout the authentication server. The supp-timeout must be a value in the range 1 -
65535.
▫ reauth-period: 3600 seconds
Default
quiet-period: 60 seconds
tx-period: 30 seconds
supp-timeout: 30 seconds
server-timeout: 30 seconds
▫
Format dot1x timeout {{reauth-period <seconds>} | {quiet-period <seconds>} | {tx-period
<seconds>} | {supp-timeout <seconds>} | {server-timeout <seconds>}}
▫
Mode Interface Config
10.1.13.1 no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on this
port to the default values. Depending on the token used, the corresponding default values are set.
▫
Format no dot1x timeout {reauth-period | quiet-period | tx-period | supp-timeout |
server-timeout}
▫
Mode Interface Config
10.1.14 dot1x user
This command adds the specified user to the list of users with access to the specified port or all ports.
The <user> parameter must be a configured user.
▫
Format dot1x user <user> {<slot/port> | all}
▫
Mode Global Config
10.1.14.1 no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
▫
Format no dot1x user <user> {<slot/port> | all}
▫
Mode Global Config