Set Gmrp Interfacemode All; Set Gvrp Adminmode; Set Gvrp Interfacemode - Planet WGSW-24000 User Manual

which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG),
GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled
if routing is disabled and portchannel (LAG) membership is removed from an interface that has GARP
enabled.
▫
Format no set gmrp interfacemode
▫
Mode Interface Config

8.6.30 set gmrp interfacemode all

This command enables GARP Multicast Registration Protocol on all interfaces. If an interface which has
GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP
functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if
routing is disabled and portchannel (LAG) membership is removed from an interface that has GARP
enabled.
▫ Disabled
Default
▫
Format set gmrp interfacemode all
▫
Mode Global Config
8.6.30.1 no set gmrp interfacemode all
This command disables GARP Multicast Registration Protocol on a selected interface.
▫
Format no set gmrp interfacemode all
▫
Mode Global Config

8.6.31 set gvrp adminmode

This command enables GVRP.
▫ Disabled
Default
▫
Format set gvrp adminmode
▫
Mode Privileged EXEC
8.6.31.1 no set gvrp adminmode
This command disables GVRP.
▫
Format no set gvrp adminmode
▫
Mode Privileged EXEC

8.6.32 set gvrp interfacemode

This command enables GVRP (GARP VLAN Registration Protocol) for a specific port.
▫
Default Disabled
▫
Format set gvrp interfacemode
▫
Mode Interface Config