Table of Contents
Advertisement
{nvram:startup-config |
system: image}
Table 5-6 Quick Start up Downloading from TFTP Server
Quick Start up Factory Defaults
Command
clear config
copy
system:running-config
nvram:startup-config
reload OR Cold Boot the
Switch
or a configuration file (nvram:startup-config).
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads the configuration file using tftp
and system:image option downloads the code file.
Enter yes when the prompt pops up to clear all the configurations
made to the switch.
Enter yes when the prompt pops up that asks if you want to save
the configurations made to the switch.
Enter yes when the prompt pops up that asks if you want to reset
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
Table 5-7 Quick Start up Factory Defaults
Details
Advertisement
Table of Contents
