Table of Contents
Advertisement
4.4.4 Secure HTTP
4.4.4.1 Secure HTTP Configuration
This page is to configuration the secure HTTP connection parameters.
Admin Mode - This select field is used to Enable or Disable the Administrative Mode of
Secure HTTP. The currently configured value is shown when the web page is displayed.
The default value is Disable.
TLS Version 1 - This select field is used to Enable or Disable Transport Layer Security
Version 1.0. The currently configured value is shown when the web page is displayed. The
default value is Enable.
SSL Version 3 - This select field is used to Enable or Disable Secure Sockets Layer
Version 3.0. The currently configured value is shown when the web page is displayed. The
default value is Enable.
HTTPS Port Number - This select field is used to set the HTTPS Port Number. The value
must be in the range of 1 to 65535. Port 443 is the default value. The currently configured
value is shown when the web page is displayed.
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but
these changes will not be retained across a power cycle unless a save is performed.
Download Certificates - Link to the File Transfer page for the SSL Certificate download.
Note that to download SSL Certificate files SSL must be administratively disabled.
Figure 4-77 Secure HTTP Configuration
Advertisement
Table of Contents
