Table of Contents
Advertisement
4.2.4.6 User Accounts
By default, two user accounts exist:
admin, with 'Read/Write' privileges
guest, with 'Read Only' privileges
By default, both of these accounts have blank passwords. The names are not case sensitive.
If you logon with a user account with 'Read/Write' privileges (i.e. as admin) you can use the User
Accounts screen to assign passwords and set security parameters for the default accounts, and to add
and delete accounts (other than admin) up to the maximum of six. Only a user with 'Read/Write'
privileges may alter data on this screen, and only one account may be created with 'Read/Write'
privileges.
Selection Criteria
User Name Selector - You can use this screen to reconfigure an existing account, or to
create a new one. Use this pull-down menu to select one of the existing accounts, or select
'Create' to add a new one, provided the maximum of five 'Read Only' accounts has not been
reached.
Configurable Data
User Name - Enter the name you want to give to the new account. (You can only enter data
in this field when you are creating a new account.) User names are up to eight characters in
length and are not case sensitive. Valid characters include all the alphanumeric characters
as well as the dash ('-') and underscore ('_') characters.
Password - Enter the optional new or changed password for the account. It will not display
as it is typed, only asterisks(*) will show. Passwords are up to eight alpha numeric
characters in length, and are case sensitive.
Figure 4-10 Serial Port Configuration
Advertisement
Table of Contents
